If an existing label or record shows 3,000 amperes, identify which specific assembly or device carries that marking before submitting a switchboard for review. We buy used, surplus and decommissioned electrical equipment; we do not sell gear. We consider all voltage classes, subject to review. For a facility supervisor with a single lineup and uncertain history, the useful starting point is visible condition, pictures, ratings and honest disclosure. Identify what is actually offered, share what is known and leave uncertain details unguessed. An offer depends on the specific equipment, condition, access and agreement between the parties.

What the 3,000 amperes marking describes

If 3,000 amperes appears in a nameplate or existing record, identify whether the marking describes the overall assembly, a main device or an individual breaker. For a switchboard, record the equipment type, manufacturer, model and quantity as well as the specific location of the rating. The rating of a lineup is not automatically the rating of every device within it.

A 3,000 amperes marking alone does not establish voltage, physical dimensions, condition or value. Send the full available label or an existing document when it can be shared safely, and distinguish known facts from estimates. If a label is inaccessible or unreadable, leave it unknown; do not open equipment or conduct a test to obtain an offer.

Describe the switchboard

A switchboard distributes power and may consist of more than one section. Give the number of sections, the overall identity shown on accessible exterior labels, and whether the board is installed or in storage. If a main device or other components are included, identify them from existing records or visible markings rather than assuming their ratings match the board.

Tell the buyer about sections that are missing, retained, or proposed for sale separately. A photograph showing the overall arrangement can help connect a list of individual tags to the board. Note if the available drawings describe a previous configuration; records and current appearance may differ after an upgrade, and a discrepancy is worth disclosing.

Describe one lineup with an uncertain past

A facility supervisor may have one lineup and little information about its earlier use. Start with its location, number of visible sections and manufacturer or ratings already recorded or safely accessible. Describe known exterior condition and mark the rest as unknown; do not infer a full history from a single label or an asset name.

Existing photos or a one-line drawing may give the buyer a starting point, even if the document is incomplete. Tell the buyer whether the lineup is installed and what is known about access or release. Sellers do not need to open compartments, test the gear or arrange a disconnect to request an offer.

If relevant: Use the diagram as a reference

An existing one-line diagram may help identify distribution equipment, relationships between sections and labels used by the site. Identify its date or revision if shown, and tie the equipment offered to tags on the drawing where possible. Redact information you are not authorized to share, or discuss a suitable description with the buyer instead.

A diagram is not a prerequisite for an offer and may not reflect later changes. Point out known differences between the drawing, existing asset list and what can be seen safely. Do not open equipment, operate devices or produce an electrical assessment; the buyer can review the information already available.

If relevant: Photograph only safely accessible details

An exterior nameplate can show manufacturer, model and ratings, but a photo is useful only if it is obtained from a safe, accessible position. Never approach energized equipment for a closer view and never open a cover for a picture. If the label cannot be read safely, share an existing photo or document, or simply say the detail is unknown.

Pair an overall equipment photo with the label photo when both are safely available, and note which asset each image describes. If there are several sections, use the inventory identifier to keep their labels separate. Do not assume a breaker label represents the whole lineup; preserve the distinction in your notes.

Link records to the actual equipment

An asset tag or existing inventory number can connect a description, photograph and location without turning every item into a separate narrative. Give quantities and identify what is included, excluded or missing. Manufacturer and model are helpful when known, while voltage and amperage should be associated with the particular label or device they describe.

Safe exterior photos and existing documents may provide a useful starting point. A drawing can be out of date and one breaker label does not necessarily describe a whole lineup, so identify the source of each claim. If the label cannot be reached safely or the history is uncertain, tell the buyer rather than guessing.

Set the sale scope and release date

Identify who owns the equipment and who is authorized to agree to a sale. Note any known lease, lien, retained component or approval that could limit the proposed transaction. If the equipment is on more than one property, keep each site and contact separate. A property owner's name does not automatically establish ownership of every piece of gear.

Explain whether the equipment is available now or expected after a project milestone. A tentative release date is not a scheduled pickup, and a list submitted for review is not a completed deal. If a component is later retained or an approval remains outstanding, update the buyer before finalizing the included equipment and timing.

From review to an agreed offer

This is a buying-only business; it does not sell electrical equipment. It considers used, surplus and decommissioned gear across all voltage classes, including switchgear from decommissioned data centers and shut-down power plants. A buyer reviews the actual equipment, condition, information and proposed scope before deciding whether to make an offer; no individual item is guaranteed acceptance.

If the parties agree on a deal, the buyer pays upfront before pickup. Confirm the agreed price, payment method, items included, any exclusions and timing with the authorized seller. A preliminary inquiry or estimate is not a completed transaction. Ask for clarification before accepting an offer if the proposed scope or payment terms are unclear.

Plan buyer-handled pickup

Once a deal is accepted, the buyer handles qualified disconnects, crane and rigging, loading, freight and hauling. Sellers do not need to test or disconnect the gear or do the physical lifting. Tell the buyer where the accepted items are located and who can coordinate access; disclose known gate, doorway, overhead or scheduling restrictions if relevant.

Provide existing measurements or weight records only when available and identify anything that is approximate. Different sites and equipment groups may need different arrangements. The parties coordinate a plan for the actual scope rather than assuming a standard truck, lifting method or guaranteed pickup date before the deal is reviewed.