If an existing label or record shows 2,000 amperes, identify which specific assembly or device carries that marking before submitting a switchboard for review. We buy used, surplus and decommissioned electrical equipment; we do not sell gear. We consider all voltage classes, subject to review. For a contractor reconciling equipment from a finished project, the useful starting point is ownership, line-item identification and practical site access. Identify what is actually offered, share what is known and leave uncertain details unguessed. An offer depends on the specific equipment, condition, access and agreement between the parties.

What the 2,000 amperes marking describes

If 2,000 amperes appears in a nameplate or existing record, identify whether the marking describes the overall assembly, a main device or an individual breaker. For a switchboard, record the equipment type, manufacturer, model and quantity as well as the specific location of the rating. The rating of a lineup is not automatically the rating of every device within it.

A 2,000 amperes marking alone does not establish voltage, physical dimensions, condition or value. Send the full available label or an existing document when it can be shared safely, and distinguish known facts from estimates. If a label is inaccessible or unreadable, leave it unknown; do not open equipment or conduct a test to obtain an offer.

Describe the switchboard

A switchboard distributes power and may consist of more than one section. Give the number of sections, the overall identity shown on accessible exterior labels, and whether the board is installed or in storage. If a main device or other components are included, identify them from existing records or visible markings rather than assuming their ratings match the board.

Tell the buyer about sections that are missing, retained, or proposed for sale separately. A photograph showing the overall arrangement can help connect a list of individual tags to the board. Note if the available drawings describe a previous configuration; records and current appearance may differ after an upgrade, and a discrepancy is worth disclosing.

Reconcile equipment from a finished job

A contractor closing a job may have stock at a jobsite and additional material in storage. Separate the items by actual owner and project allocation before proposing a sale. Existing purchase records or an asset list can help describe the equipment, but a job name alone does not prove the contractor owns every item.

Identify which assets are still installed and which are already stored, then share known pickup constraints at each property. Where a customer or another contractor must authorize release, note the dependency. The buyer can review the available information while the responsible parties clarify authority and timing.

If relevant: Distinguish unused from unverified

Unused surplus and used equipment may appear together after a project. Explain the basis for an unused description, such as an existing inventory record, and disclose whether original packaging has been opened or the storage history is incomplete. Packaging alone does not prove the condition, completeness or operating status of an item.

List quantities, manufacturer and identifiable ratings separately for each group. Note any missing accessories or documentation and mark uncertainty explicitly. The buyer can review the inventory without asking the seller to energize or test a device; an offer depends on the actual items and the agreement reached.

If relevant: Use alternative records, not guesses

If a nameplate is missing or unreadable, describe the equipment type, number of sections and visible exterior features without asserting a model or rating you cannot verify. Existing purchase records, asset tags, one-line drawings or earlier photographs may help identify the item. Say which source supplied each detail and whether the source is current.

Do not open a cover or approach energized equipment to search for a hidden label. A safely accessible overall photograph, a location in the inventory and an honest unknown can be enough to start a conversation. The buyer may request further information, and the lack of a nameplate may affect the review.

Record facts and unknowns separately

A practical equipment list can be short: type, quantity, location, any known manufacturer and ratings, and whether the item is still installed or stored. Add section counts or related loose items where relevant. The same manufacturer may appear on several distinct assemblies, so match labels and records to the right line rather than combining unlike items.

Note visible exterior damage, missing components and the limits of the available history. Do not claim a device works simply because its exterior looks intact. Existing documentation and safely accessible photos help a buyer review the inventory, but a seller is never asked to open, operate or test equipment for this request.

Confirm who can release the assets

A clear proposal identifies the authorized seller, the specific items offered and any parts that are not included. Different owners, tenants, contractors or lenders may have an interest in different assets, so disclose known restrictions and approval requirements. Use a separate entry for each site or equipment group when authority or availability differs.

State whether items are still installed, already removed or stored, and provide your best known release window as an estimate. Other project work can affect the handoff. Both sides should agree on the actual scope and schedule rather than assuming that a preliminary inventory or a hoped-for date is final.

Understand the buying process

The business buys rather than sells equipment, and reviews used, surplus and decommissioned distribution gear of all voltage classes. It also considers switchgear from decommissioned data centers and shut-down power plants. A request starts a review, not a promise that every item or every proposed lot qualifies for an offer.

An agreed deal should identify the equipment and exclusions, the price and the payment and handoff arrangements. The buyer pays upfront for agreed deals before pickup. Review those terms with the person authorized to sell, and discuss open questions before accepting; changes in the actual scope may require a revised discussion.

Coordinate the physical handoff

For accepted deals, the buyer handles crane, rigging, qualified disconnects, loading, freight and hauling. The seller does not have to test, disconnect, lift or load the equipment. Explain whether the gear remains installed or is already stored and provide the site contact, actual access rules and known constraints so the buyer can plan the agreed work.

Existing dimensions, weights and photographs may help if they are available, but mark estimates and unknowns honestly. The buyer and site contact coordinate the details for the actual property and deal; a particular crane, route or pickup date is not assumed. Do not approach energized equipment or perform electrical work to prepare a quote.